Segmented bending machine Stalex PBB1020/3SH

Description:

Bending machine Stalex PBB 3SH series is designed for the manufacture of various products from sheet materials with wide and complex shapes. The machine bends products on four sides or more from the main surface of the workpiece, including non-parallel bends. Such as boxes, pallets, ventilated facades, facade cassettes, casings and any other profile metal products.

The machine is supplied with three segment beams (segment top beam, segment bending beam, segment bottom main beam)

Machine without limiting the depth of sheet feeding

The presence of a foot drive allows the operator to quickly rotate and move workpieces

Steel construction guarantees the necessary rigidity and stability of the machine during daily use

The design of the machine has a vertical stroke of the clamping beam, which allows fixing workpieces with strictly parallel surfaces and a stronger clamping along the entire length of the machine, in comparison with conventional axial clamps.

Bending beam spring system facilitates the operator's work on the machine

The machine is equipped with an adjustable sheet thickness and bending angle limiters

Each of the three segment beams has 12 segments (model 1020 / 3SH) / 13 segments (model 1270 / 3SH) in different lengths:

Segment size on Stalex PBB1020 / 3SH (from left to right): 75, 25, 30, 35, 40, 45, 50, 75, 100, 200, 270, 75 mm.

Segment size on Stalex PBB1270 / 3SH (from left to right): 75, 25, 30, 35, 40, 45, 50, 75, 100, 200, 250, 270, 75 mm.

Bending beam width - 15 mm.

The width of the upper pressure beam segment is 45 mm (the width of the part of the segment in contact with the sheet)

Clearance height of the upper pressure beam without segment in the pressed state - 100 mm