Sheet bending machine with triple segment beam MetalMaster MTB 3S 1215
  • Rating:
  • Manufacturer:
  • Model:
    Сегментированный листогиб Metal Master MTB 3S 1215
  • Available:
    In stock
  • Weight:
    465.00 kg
  • Dimensions (L х W х H):
    1,700.00 x 710.00 x 1,270.00 mm
  • Show all attributes


Standard complete set:

  • Manual
  • Complete machine

Machine description:

The solution of such a problem as the manufacture of parts of complex shapes from thin sheet metal requires appropriate equipment. In the conditions of small-scale and medium-scale production, experts recommend using a reliable and functional segmental sheet bending machine MTB 3S 1215 MetalMaster. This equipment will allow you to create front cassettes, trays, boxes, as well as various casings (electrical panels, air conditioners, electrical cabinets, that is, this machine is an excellent solution for enterprises that are engaged in instrumentation).

Consider the main advantages of the MTB 3S 1215 model:

  • Clamping of sheet metal is made across the entire width of the machine. As a result, the corner of the workpiece turns out to be even without any flaws and defects;
  • The operator, thanks to the spring compensator, has to make minimal efforts, which greatly facilitates his work, which means the productivity of your enterprise increases;
  • The MTB 3S 1215 is stable. The design of the equipment in question does not loosen in the process of performing the required operations;
  • This unit does not require any special maintenance. You do not need a highly qualified specialist to solve this problem;
  • The equipment is easily adjusted, the sheet pressure is adjusted by simply turning the handle;
  • You can quickly and easily create even the most complex box-shaped products. Beam segments enable non-parallel bends. Also note that the segments are fairly easy to remove and move.
  • The segment bending machine MTB 3S 1215 is the ideal technique for working with sheet metal. The sheet bending machine has small dimensions and modest weight, which means that you can easily carry out its transportation if necessary. The production of roofing parts and decorative elements will not cause you any difficulties if there is a high-quality segment bending machine in the workshop.

The creation of complex box-shaped products from thin sheet metal (cases, front cassettes, cassettes) requires high-quality and functional equipment, which is the segmental sheet bending machine MetalMaster MTB 3S 1215 (1.25 m)

This technique is equipped with powerful segmented beams that can be easily adjusted. The machine is quite easy to operate and you do not need a long training from a specialist before starting to work.

In order to adjust the sheet clamping force, the machine operator just needs to make a simple rotation of the clamping beam handle.

The series has 3 beams with knives on which there are segments. Each beam has 13 segments with different widths. The outer segments are in the form of a boot for fixing under the pressure beam when working with products with curved sides, for example, for facade cassettes and boxes. Fasten the segments into the groove parts of the mounting rail with additional fixation with hex head screws. If necessary, the segments can be conveniently removed and moved to another place. The sheet bending machine is equipped with angle stops located on one side of the beam for bending when turning, which makes it possible to bend to the required angle without measurements.

In the case of processing sheets of different thicknesses, it is necessary to adjust the clamping forces and the position of the bend beam relative to the main beam along the vertical axis. In this case, the handle of the pressure beam rotates on both sides. The same handles can be used to adjust the vertical position of the bending beam without additional installations that readjust the listogib.

The movable beams are equipped with spring-loaded expansion joints that are resistant to wear. This allows you not to spend effort on lifting the beam and bending a metal sheet in the process of working on the bending machine. Additionally, the machine is equipped with a foot drive that regulates the alternation of the pressure beam. As a result, the operator's hands remain free, which makes it possible to quickly and accurately position the workpiece on the machine.

The warranty for equipment and accessories is 1 year. We deliver equipment throughout Russia and the CIS!

Stalex PBB 3SH
Max. sheet thickness (σw <400 MPa) 1.5 mm
Max. lifting height of the pressure beam 45 mm
Bending angle 0-150º
Net / gross weight 465 kg
Main characteristic
Working length, mm 1270 mm
Dimensions LxWxH, mm 1700х710х1270 mm
Weight, kg 465 kg

Related Products

Tags: Segmented sheet bending MetalMaster MTB 3S 1215