Found it cheaper? We will make an offer better
- Model:Станок вальцовочный электромеханический Stalex ESR-1300х2.5
- Available:In stock999
- Weight:600.00 kg
- Dimensions (L х W х H):2,000.00 x 720.00 x 1,200.00 mm
- Show all attributes
- Rollers with three asymmetric shafts
- Shafts are made of high strength steel, hardened (hardness HRC45) and polished
- Rotating lower and upper shaft through a gear system and chain drive from an electric motor
- Adjustable lower shafts
- Grooves for bar bending
- Swing-and-tilt mechanism of the upper shaft with eccentric clamping
- Possibility of bending on a cone
- External pedal with emergency stop button
- The upper shaft rotates in both directions
- Comes with taper bending function
- Tool kit as standard
The rolling machine is designed to make a sheet of cylindrical shape of various radii, this equipment is widely used for the manufacture of components for ventilation, drainage equipment, in cases of production of cylindrical and conical products, straightening of flat workpieces, hemming. The remote pedal is duplicated by the control panel on the machine bed. The chain drive transfers rotation from the electric motor to the shafts. The upper shaft is folding for easy removal of finished products. The folding shaft is equipped with a lock to prevent its spontaneous opening during operation.
Making a cone - using a machine, you can make conical products. This is done by the support roller on the right side of the machine. For this, it is necessary to ensure that the workpiece is clamped only near the support roller.
The warranty for equipment and accessories is 1 year.
We deliver equipment throughout Russia and the CIS!
|Stalex rolling machine|
|Shaft diameter, mm||90 mm|
|Rotational speed||8.8 rpm|
|Engine power||1.5 kW|
|Shaft hardness||up to 45 HRC|
|Working length, mm||1300mm|
|Metal thickness, mm||2.5mm (low carbon steel, σs ≤245 MPa)|
|Dimensions LxWxH, mm||2000х720х1200 mm|
|Weight, kg||540/600 kg|