Found it cheaper? We will make an offer better
- Model:Станок вальцовочный ручной Stalex W01-0.8х1300
- Available:In stock999
- Weight:172.00 kg
- Dimensions (L х W х H):1,700.00 x 320.00 x 500.00 mm
- Show all attributes
Rolling machine Stalex W01-0.8x1300 is designed to give the sheet a cylindrical and conical shape in the form of shells of various radii, this equipment is widely used for the manufacture of professional-individual and small-scale production of ventilation components, drainage elements, in cases of production of cylindrical and conical products (for rolling conical products, the shape of the workpiece must be pre-prepared [cut] from the required sketch and calculated dimensions), straightening of flat workpieces, hemming.
Rolling machine manual desktop Stalex W01-0.8x1300
0.8mm (low carbon steel, σs ≤245 MPa)
The maximum permissible thickness when working with stainless steel is no more than 0.5 mm.
The minimum possible Ø when working with low-carbon steel 0.8mm is at least 90mm (as it depends on the type, grade, heat treatment of the material, as well as its length and thickness). It is possible to more accurately determine the minimum Ø - it is possible only by trial rolling.
Can be installed on any workbench.
Swing-out mechanism of the upper shaft.
Adjustment of the lower shaft with a cam.
Upper roll with quick coupling.
Convenient eccentric clamp.
Grooves for bending rings.
Production - China.
The warranty for equipment and accessories is 1 year.
We deliver equipment throughout Russia and the CIS!
|Stalex rolling machine|
|Shaft diameter, mm||60 mm|
|Working length, mm||1300mm|
|Metal thickness, mm||0.8mm (low carbon steel, σs ≤245 MPa)|
|Dimensions LxWxH, mm||1700х320х500мм|
|Weight, kg||172 kg|