Found it cheaper? We will make an offer better
- Manufacturer:
- Model:Станок вальцовочный электромеханический Stalex ESR-1300х1.5E
- Available:In stock999
- Weight:340.00 kg
- Dimensions (L х W х H):1,900.00 x 550.00 x 1,100.00 mm
- Show all attributes
Characteristics:
- Rollers with three asymmetrical shafts
- Shafts are made of high strength steel
- Handles on the front shaft, for quick clamping of material and fixing
- The upper shaft has a groove for sheet threading
- The upper shaft rotates in both directions
- Grooves for bending the bar
- Possibility of bending on a cone
- Remote pedal with emergency stop button
- Lift lock for the lower (bending shaft), i.e. R bending
The rolling machine is designed to give the sheet a cylindrical shape of various radii, this equipment is widely used for the manufacture of components for ventilation, drainage equipment, in cases of the production of cylindrical and conical products (for rolling conical products, the shape of the workpiece must be pre-prepared [cut] from the required sketch and calculated dimensions ), straightening of flat workpieces, hemming.
Stalex rolling ESR-1300х1.5Е electromechanical
Vendor code |
391103 |
Maximum thickness (low carbon steel, σs ≤245 MPa) |
1,5 mm |
Maximum width |
1300 mm |
Roller diameter |
60 mm |
Rotational speed |
22 rpm |
Engine power |
0.75 kW (380) |
Packing size |
1900х550х1100 |
Weight |
340 kg |
Production |
China |
Guarantee |
1 year |
Стоимость |
|
* Maximum allowable sheet thickness when working with low-carbon steel (yield point σs should not exceed σs ≤245 MPa) - no more than 1.5 mm |
|
* When working with aluminum, the thickness range is - min. 1.0mm - max. 2.2 mm (with a smaller thickness of the aluminum sheet - the formation of the shell will not be stable). |
|
* The minimum diameter of the resulting workpiece when working with low-carbon steel of 1.5 mm will be at least 110 mm (this information is for reference only and depends on the grade, strength of heat treatment of the material, as well as its length and thickness). When working with metal thickness (stainless steel) ≤ 1.0mm - maximum possible min. The diameter of the shell can be 120mm (this information is for reference only and depends on the grade, strength, heat treatment of the material, as well as its length and thickness). There is no exact formula for calculating the minimum diameter of the resulting workpiece, because it depends on the type, grade, heat treatment of the material, as well as its length and thickness. Determine the minimum Ø more precisely - it is possible only by trial rolling. |
The warranty for equipment and accessories is 1 year.
We deliver equipment throughout Russia and the CIS!
Stalex rolling machine | |
Shaft diameter, mm | 60 mm |
Rotational speed | 22 rpm |
Engine power | 0.75 kW (380) |
Production | China |
Guarantee | 1 year |
Main characteristic | |
Working length, mm | 1300mm |
Metal thickness, mm | 1.5mm (low carbon steel, σs ≤245 MPa) |
Dimensions LxWxH, mm | 1900х550х1100 mm |
Weight, kg | 340 kg |
Tags: Electromechanical rolling machine Stalex ESR-1300х1.5E