Buy rolling machine Stalex of electromechanical type ESR-1300x1.5
  • Rating:
  • Manufacturer:
  • Model:
    Станок вальцовочный электромеханический Stalex ESR-1300х1.5
  • Available:
    In stock
  • Weight:
    340.00 kg
  • Dimensions (L х W х H):
    1,800.00 x 600.00 x 1,100.00 mm
  • Show all attributes

Characteristics:

- Rollers with three asymmetric shafts

- Shafts are made of high strength steel

- Grooves for bending the bar

- Swing-and-tilt mechanism of the upper shaft with eccentric clamping

- Possibility of bending on a cone

- Remote pedal with emergency stop button

- The upper shaft rotates in both directions

The rolling machine is designed to make a sheet of cylindrical shape of various radii, this equipment is widely used for the manufacture of components for ventilation, drainage equipment, in cases of production of cylindrical and conical products, straightening of flat workpieces, hemming.

Stalex ESR-1300х1.5 electromechanical rolling machine:

Vendor Code

391101

Maximum thickness

(low carbon steel, σs ≤245 MPa)

1,5 mm

Maximum width

1300 mm

Roller diameter

75 mm

Rotational speed

22 rpm

Engine power

0.75 kW (380)

Packing size

1800х600х1100

The weight

340 kg

Production

China

Guarantee

1 year


 

* Maximum allowable sheet thickness when working with low-carbon steel (yield point σs should not exceed σs ≤245 MPa) - no more than 1.5 mm

* When working with aluminum, the thickness range is - min. 1.0mm - max.2.2mm (with a thinner aluminum sheet - the shell formation will not be stable).

* The minimum diameter of the obtained workpiece when working with low-carbon steel of 1.5 mm will be at least 100 mm (this information is for reference only and depends on the grade, strength of heat treatment of the material, as well as its length and thickness).

When working with metal thickness (stainless steel) ≤ 1.0mm - maximum possible min. The diameter of the shell can be 110mm (this information is for reference only and depends on the grade, strength, heat treatment of the material, as well as its length and thickness).

There is no exact formula for calculating the minimum diameter of the resulting workpiece, because it depends on the type, grade, heat treatment of the material, as well as its length and thickness. It is possible to more accurately determine the minimum Ø - it is possible only by trial rolling.

  

The warranty for equipment and accessories is 1 year. We deliver equipment throughout Russia and the CIS!

Stalex rolling machine
Shaft diameter, mm 75 mm
Rotational speed 22 rpm
Engine power 0.75 kW (380)
Production China
Guarantee 1 year
Main characteristic
Working length, mm 1300mm
Metal thickness, mm 1.5mm (low carbon steel, σs ≤245 MPa)
Dimensions LxWxH, mm 1800х600х1100 mm
Weight, kg 340 kg

Related Products

Tags: Electromechanical rolling machine Stalex ESR-1300х1.5