Rolling machine AVS-1300x2 mm

Attention! The price is indicated with a gear lift of the shaft!

Rolling manual bending machines (rolls) are designed for use in small workshops. Depending on the model, the 3-roll manual machines of this series can bend sheet steel of various grades with a thickness of 0.4 mm to 2 mm and a length of up to 2m meters. They can be used for bending aluminum, in the manufacture of drains and air ducts of circular cross-section, as well as shaped parts of rectangular air ducts.

The processing process is a bending-rolling of the sheet billet through the rolls of the unit. Finished products can have both a closed circuit and an open one. The main work is done by three wolves, of which the lower and side ones rotate in the forward and reverse directions, the upper one rotates in the forward and reverse directions and moves up and down. Easy maintenance is achieved by a simple and fully collapsible metal structure of the machine. Complete absence of straight sections in the workpiece.

Main features

All-metal shafts

Working surface of the rolls 1300 mm

The thickness of the rolled steel is 2 mm

Shaft diameter 85x85x85mm

Minimum sheet bending diameter 110 mm

Electromechanical drive

Power supply 380V

Power consumption 1.1 kW

________________________________________________________________

Overall dimensions

Length 1860 mm

Width 640 mm

Height 1650 mm

Weight 450 kg

________________________________________________________________

Additional equipment

Quenching of all shafts

Motorized upper shaft

Stop for rolling the cone

Frequency converter (220V) with speed controller

____________________

An additional option is a 220V frequency converter. Allows you to adjust the speed of rotation.

When ordering-write in the comments that you need a frequency converter!