LBM-07 series sheet bending machines are manual (mechanical) fully pass-through stationary machines with non-segmented beams, manufactured in Poland, designed to work in the workshop in the manufacture of additional roof elements, ventilation components and other sheet metal products, bending and cutting of sheet metal (320 N / mm2) up to 0.7 mm thick.
The LBM machine is a stationary bending machine that does not require special preparation of the working platform and rigid fixation into the base. The sheet bending machine is installed on powerful welded supports, which ensure a reliable and stable position of the machine.
The lifting of the pressure tank is carried out due to the movement of the eccentric, which provides a high speed of lifting the beam and high productivity of the machine. The clamping force of the workpiece is convenient and easy to adjust.
One-piece milled pressure beam edge allows you to work with large metal thicknesses
The lifting of the pressure beam is vertical. This feature provides a full and wide opening of the machine up to 80 mm.
The main beam is a powerful I-beam, which sets high rigidity of the bending machine structure and does not require the installation of additional adjustments and reinforcing elements. The main beam allows you to confidently work with steel up to 0.7 mm, ensuring a flawless bend
The massive pressure beam is additionally reinforced with a traction that prevents the beam from bending during the work of the bending machine. Reinforced pressure beam ensures consistently high product quality
The bending beam is equipped with reinforcing rods with the ability to adjust its deflection. Reinforcing elements made it possible to maintain a small thickness of the bending beam, which allows making more diverse elements and profiles with small cross-sectional dimensions.
The machine is equipped with a pressure beam pneumatic compensator. Compensators provide comfortable work on the bending machine and save the worker's strength
The bending beam is equipped with a protractor. This allows you to produce products with a precisely defined bending angle.
The roller knife provides industrial quality cutting of steel workpieces up to 0.9 mm thick. The knife has a number of adjustments. The pressure beam of the bending machine serves as a guide for the movement of the knife
To work with large sheets, the LBM has a rear support table with manual depth stops. If it is necessary to cut several workpieces of the same size, the stops are installed in front of the machine and serve as stops that set the size of the workpiece to be cut.
To work with large sheets, the LBM has a rear support table with manual depth stops. If it is necessary to cut several workpieces of the same size, the stops are installed in front of the machine and serve as stops that set the size of the workpiece to be cut.
