Found it cheaper? We will make an offer better
- Model:Линия для изготовления прямоугольных воздуховодов УВС-1500
- Available:In stock999
- Weight:5,500.00 kg
- Dimensions (L х W х H):5,500.00 x 2,300.00 x 1,350.00 mm
- Show all attributes
The line consists of metal sheet decoilers, a straightening device, a stiffening system, an angular and rectangular die-cutting system, a bending machine and a hydraulic guillotine.
The UVS-1500 line is automatically controlled by a CNC system with high-precision servo motors with feedback, which allows achieving high accuracy, productivity and reliability of the line. The maximum operating speed of the line is 16 m / min.
Length deviation ± 0.5 mm.
Diagonal deviation ± 0.8 mm.
The use of this line allows to receive up to 1000 m2 of air ducts per shift.
This diagram shows the basic principle of the line for the manufacture of rectangular ducts
The line includes:
- unwinder of rolled metal sheet -2 pcs
- Russified industrial CNC system
- encoders replaced by servo drives
- duct meter
- sheet dressing device
- stiffening system
- corner cutters
- listogib with swivel beam
- guillotine cutting off the finished duct
Commissioning and personnel briefing:
Commissioning works are carried out by authorized specialists who have undergone special training. Departure of a specialist for commissioning is carried out on the basis of an application received from the buyer within three days. By the time the specialist arrives, the buyer must have carried out in accordance with the instructions for installing the equipment at the workplace and have connected the appropriate communications.
To carry out commissioning work, a separate contract is required.
The warranty for equipment and accessories is 1 year.
We deliver equipment throughout Russia and the CIS!
|Line of rectangular ducts UVS-1250|
|Maximum roll width, mm||1530 mm|
|Length, mm||600-2500 mm|
|Number of metal unwinders||2 pcs|
|Max. roll weight, kg||5000 kg|
|Max. number of decoilers||≤ 4|
|Max. thickness, mm||0.5-1.2 mm|
|Roll inner diameter, mm||508 mm|
|Roll outer diameter, mm||≤ 1300 mm|
|Minimum thickness, mm||0.5 mm|
|Smallest air duct section, mm||125х125 mm|
|Stiffener shape||Parallel edges|
|Max. speed, m / min||16|
|Power consumption, kW||11|
|Cutting error along length, mm / min||±0.5|
|Diagonal deviation, mm||±0.8|
|Installation area, m2||13|
|Bending errors, mm / min||1|
|Degree deflection when bending||±5°|
|Dimensions LxWxH, mm||5500х2300х1350 mm|
|Weight, kg||5500 kg|