Folding machine LC 12 DR

Folding machines of the Stalex LC series are the most commonly used equipment for the production of seams (seams or seams). Designed for the production of 6 main types of seam seams.

Folding machines Stalex LC are suitable for work both on construction sites, as well as used in workshops for the manufacture of air ducts and components for drainage systems. In addition, folding machines have a number of advantages over other methods of manufacturing a fold - this is a clear adherence to the specified parameters: radius, length, shape.

Features:

1. Distinctive features of Stalex LC-12DR folded products are the absence of the need to replace rollers. Changeover from one type to another takes less than a minute and consists in moving the guide, which is responsible for the entry of the material under the rollers.

2. Six types of seam seams without changeover by moving the machine guides.

3. The machine allows to produce both straight sections and curvilinear components of a rectangular drainage system (flanging).

4. The versatility of this machine is complemented by the function of rolling the interconnecting strip (6th seam), which includes a cut-off roller that cuts the metal to the required width of the rolled product.

5. The machine has the ability to adjust the clamping of the material in thickness - thanks to the Belleville spring washers placed in the machine structure

6. The handle of inclusion has three positions - position off. and position incl. rotation in both directions, which makes it easy to remove the jam sheet in the machine.

Main types of seams:

__________________    

Standing fold

Standing seam - used as a counterpart to Pittsburgh seam, single standing seam, double standing seam

__________________    

Single standing seam

It is used to connect picture strips of metal roofs. As an example - standing seams are arranged along the roof slope

__________________    

Pittsburgh Fold

Pittsburgh seam (corner, American) is the most common method of producing rectangular ducts, both straight sections and shaped parts

__________________    

Reclining fold

Reclining seam (longitudinal) - is used for the production of downpipes, as well as round and rectangular air ducts.

__________________    

Interconnecting rail

C-rail - the easiest way to connect rectangular ducts, reducing the cost of production. Very effective for laying ductwork in tight spaces

__________________    

Standing seam along the radius (flanging)

Flanging is an additional operation with a curved seam joint.